다롄펑루이화학제품유한회사

　　OtherName: Phenethyl alcohol,α,α-dimethyl-;α,α-Dimethylphenethanol;α,α-Dimethylphenethyl alcohol; Benzyldimethylcarbinol; Dimethylbenzylcarbinol; DMBC; 1,1-Dimethyl-2-Phenylethanol; 1,1-Dimethylphenylethanol; 2-Methyl-1-phenyl-2-propanol; Darocur 1173; Phenyl-tert-butanol;α,α-Dimethyl-β-phenylethyl alcohol;α,α-Dimethylphenethyl alcohol, tech.;β-Phenyl-tert-butyl alcohol; 2-Benzyl-2-propanol; 2-Hydroxy-2-methyl-1-phenylpropane; 2-Methyl-3-phenyl-2-propanol; 1,1-Dimethyl-2-phenylethyl alcohol; 2-Methyl-1-phenylpropan-2-ol; Ethanol, 1,1-dimethyl-2-phenyl-;α,α-Dimethylphenylethyl alcohol; Benzeneethanol,α,α-dimethyl- 　　CAS No: 100-86-7 　　Molecular Formula: C10H14O 　　Appearance: Colorless transparent liquid 　　Content:>99% 　　Solidifying Point:>22.5 　　Acid Value:

　　OtherName: Phenethyl alcohol,α,α-dimethyl-;α,α-Dimethylphenethanol;α,α-Dimethylphenethyl alcohol; Benzyldimethylcarbinol; Dimethylbenzylcarbinol; DMBC; 1,1-Dimethyl-2-Phenylethanol; 1,1-Dimethylphenylethanol; 2-Methyl-1-phenyl-2-propanol; Darocur 1173; Phenyl-tert-butanol;α,α-Dimethyl-β-phenylethyl alcohol;α,α-Dimethylphenethyl alcohol, tech.;β-Phenyl-tert-butyl alcohol; 2-Benzyl-2-propanol; 2-Hydroxy-2-methyl-1-phenylpropane; 2-Methyl-3-phenyl-2-propanol; 1,1-Dimethyl-2-phenylethyl alcohol; 2-Methyl-1-phenylpropan-2-ol; Ethanol, 1,1-dimethyl-2-phenyl-;α,α-Dimethylphenylethyl alcohol; Benzeneethanol,α,α-dimethyl- 　　CAS No: 100-86-7 　　Molecular Formula: C10H14O 　　Appearance: Colorless transparent liquid 　　Content:>99% 　　Solidifying Point:>22.5 　　Acid Value:

　　Vegetative DHA fine powder 　　DHA powder from microagae Produced by spray drying 　　Analytical Item specification 　　Appearance Solid power 　　DHA(%)≥10% 　　EPA(%)≤0.25 　　Total Lipid(%)≥25 　　Peroxide Value(meq/kg)≤5 　　Moisture(%)≤5 　　As(mg/kg)≤0.5 　　Pb(mg/kg)≤1 　　Colony total(cfu/g)≤3000 　　Mold total(cfu/g)≤25 　　Coliform(MPN/100g)≤90 　　Pathogenic germ Negative 　　Docosahexaenoic Acid Oil 40% 　　Description: Vegetable oil from microagae, containing 40% docosahexaenoic acid (DHA) 　　Appearance: Free flowing light yellow to dark orange liquid oil (triglyuceride). 　　Odor: Characteristic 　　Antioxidants: Ascorbyl palrnitate and tocopherols 　　Specification: 　　CHEMICAL CHARACTERISTICS 　　Peroxide value

　　Other name:midinosarcosine Monohydrate 　　CAS No: 6020-87-7 　　Molecular Formula: C4H9N3O2.H2O 　　Molecular Weight: 149.15 　　Property: White crystal or powder, slightly soluble in water, insoluble in ethanol, thyl ether. 　　Melting point: 292ºC 　　Water solubility:3 g/L (20ºC) 　　SPECIFICATIONS: 　　Item Specification 　　Appearance White crystal or crystalline powder,80/200 meshes 　　Assay 99.90% min 　　Loss on Drying 12.0% max 　　Heavy Metal(as Pb) 10ppm max 　　Arsenic 1ppm max 　　Sulfate 0.1% max 　　Residue on Ignition 0.1% max 　　USES: Pharmaceutical ingredient, health product, etc. 　　PACKAGE: Carton or Carton or Drum with 2 inner PE bags 　　STORAGE: Be stored in cool, dry, and ventilated storage, free from heat or sunlight, and free from toxic and harmful foods. Be protected with pall on delivery, keep free from rain moisture, toxic and harmful goods.

　　Other name: carmellose; croscarmellose; Carboxymethyl Cellulose; Cellulose Carboxymethyl Ether; Cellulose-CM 23; cmc; Carboxy Methyl Cellulose; carboxy methyl cellulose; cm cellulose cation exchanger fast flow fibrous F; Carboxyl Methyl Cellulose 　　CAS No:000-11-7 　　Chemical name: Sodium salt of the carboxymethyl ether of cellulose 　　Chemical formula: 　　The polymers contain substituted anhydroglucose units with the 　　following general formula: C6H7O2(OR1)(OR2)(OR3), where R1, R2 R3 each may be one of the following: 　　H 　　CH2COONa 　　CH2COOH 　　Molecular weight: 　　Higher than approximately 17 000 (degree of polymerisation approximately 100) 　　Definition: Carboxy methyl cellulose is the partial sodium salt of a carboxymethyl ether of cellulose, the cellulose being obtained directly from natural strains of fibrous plant material 　　Description: Slightly hygroscopic white or slightly yellowish or greyish odourless and tasteless, granular or fibrous powder. 　　Identification: 　　A. Solubility Yields a viscous colloidal solution with water. Insoluble in ethanol. 　　B. Foam test A 0,1 % solution of the sample is shaken vigorously. No layer of foam appears. (This test permits the distinction of sodium carboxymethyl cellulose from other cellulose ethers) 　　C. Precipitate formation To 5 ml of a 0,5 % solution of the sample, add 5 ml of 5 % solution of copper sulphate or of aluminium sulphate. A precipitate appears. (This test permits the distinction of sodium carboxymethyl cellulose from other cellulose ethers and from gelatine, locust bean gum and tragacanth). 　　D. Colour reaction Add 0,5 g powdered carboxy methyl cellulose sodium to 50 ml of water, while stirring to produce an uniform dispersion. Continue the stirring until a clear solution is produced, and use the solution for the following test: 　　To 1 mg of the sample, diluted with an equal volume of water, in a small test tube, add 5 drops of 1-naphthol solution. Incline the test tube, and carefully introduce down the side of the tube 2 ml of sulphuric acid so that it forms a lower layer. A red-purple colour develops at the interface. 　　Purity: 　　Assay: Content on the anhydrous basis not less than 99,5 % 　　Degree of substitution Not less than 0,2 and not more than 1,5 carboxymethyl groups (CH2COOH) per anhydroglucose unit 　　Loss on drying: Not more than 12 % (105°C to constant weight) 　　pH of a 1 % colloidal solution: Not less than 5,0 and not more than 8,5 　　Arsenic: Not more than 3 mg/kg 　　Lead: Not more than 5 mg/kg 　　Mercury: Not more than 1 mg/kg 　　Cadmium: Not more than 1 mg/kg 　　Heavy metals (as Pb): Not more than 20 mg/kg 　　Total glycolate: Not more than 0,4 %, calculated as sodium glycolate on the anhydrous basis 　　Sodium: Not more than 12,4 % on the anhydrous basis